Skip to content
NASH Reviewer

TLE: IA - Shielded Metal Arc Welding (SMAW) Budget of Work, Grades 9 and 10

TLE Shielded Metal Arc Welding (SMAW) budget of work for Grades 9 and 10, SY 2026-2027: DepEd's 14 learning competencies by week, in no set term.

DepEd places each competency in its weeks and names no term.

The lesson exemplars named on this page are on one page of their own: TLE: IA - Shielded Metal Arc Welding (SMAW) Lesson Exemplars, Grades 9 and 10.

Published Updated

At a glance

Counted by NASH Reviewer from DepEd's file.

PartWeeksCompe­tenciesWith an exemplar
Weeks1 to 101414

DepEd's lesson exemplars that match a competency are listed once, under Lesson exemplars. Each competency names the ones it matches, and each name leads to the exemplar in that list. Each linked exemplar opens DepEd's copy on Google Drive. An exemplar's quarter and week are those of the four-quarter calendar it was written for, even where it names SY 2026-2027; they are not this budget of work's weeks. An exemplar may also cover competencies this budget of work words differently or does not print. Every exemplar's notice reserves it for teachers and forbids copying or sharing it without leave.

DepEd's notes

Please note that each sector under TLE: IA is studied for one term. This is applicable under Grades 9 and 10.

Weeks

Sector
Shielded Metal Arc Welding (SMAW)
Performance standard

The learners perform plate cutting and edge preparations. The learners perform Shielded Metal Arc Welding processes and techniques. The learners compute the service cost based on job requirements.

Content standard

  • Demonstrate an understanding of the concepts and principles in shielded arc welding works.
  • Demonstrate an understanding of computing cost services.

Week 1

  • Discuss the arc welding processes.

    Lesson exemplars: Quarter 1/3: Week 1, Week 2, Week 3, Week 4

  • Demonstrate setting-up of welding machine based on required specifications and/or manufacturer’s instructions following the safety precautions.

    Lesson exemplars: Quarter 1/3: Week 1, Week 2, Week 3, Week 4

Suggested activities, Week 1
  • Arc Welding Process Research Report

    • The learner researches different arc welding processes (SMAW, MIG, TIG) and writes a short report explaining the process, equipment, advantages, and safety precautions.
    • Research an arc welding process and create a report explaining its steps, tools, and safety practices.
  • Arc Welding Process Diagram and Explanation

    • The learner creates a labeled diagram of an arc welding setup, illustrating the process and describing each step, including electrode use, current flow, and safety precautions.
    • Draw and label an arc welding process diagram and explain each step along with safety measures.
  • Welding Machine Setup Practice

    • The learner practices setting up a welding machine according to the manufacturer’s specifications, including selecting the correct current, electrode type, and polarity, while observing all safety precautions.
    • Set up a welding machine following the manufacturer’s instructions and safety rules.
  • Welding Machine Setup Step-by-Step Demonstration

    • The learner performs a step-by-step demonstration of setting up the welding machine on a practice workstation, labeling each component and explaining its function, while wearing proper PPE.
    • Demonstrate and explain the step-by-step setup of a welding machine while following safety procedures.

Week 2

  • Assemble welding positioner, jigs, and fixtures according to job requirements following the safety precautions.

    Lesson exemplars: Quarter 1/3: Week 1, Week 2, Week 3, Week 4

Suggested activities, Week 2
  • Welding Positioner Assembly Practice

    • The learner independently assembles a welding positioner on a practice workstation according to job specifications, ensuring correct alignment, secure fastening, and adherence to safety procedures.
    • Assemble a welding positioner accurately according to job requirements while following all safety precautions.
  • Jigs and Fixtures Setup Exercise

    • The learner sets up welding jigs and fixtures for a specific task, making sure components are properly positioned and secured, and observes all necessary safety measures.
    • Set up welding jigs and fixtures for a task while ensuring proper alignment, security, and safety compliance.

Week 3

Suggested activities, Week 3
  • Weld Joint Identification and Comparison

    • The learner studies sample welds or diagrams (e.g., butt, lap, corner, edge, and T-joints) and writes a short report comparing each type, including its applications, advantages, and limitations.
    • Identify different types of weld joints and explain their applications, advantages, and limitations.
  • Welding Procedure Chart Creation

    • The learner creates a chart or diagram showing different welding procedures (e.g., SMAW, MIG, TIG) and associates each with the appropriate joint types, describing key steps and safety precautions.
    • Create a chart linking welding procedures to joint types, including key steps and safety measures.
  • Research on Welding Codes and Standards

    • The learner researches the American Welding Society (AWS) and American Society of Mechanical Engineers (ASME) codes and standards, identifying their purpose, scope, and applications in welding practices.
    • Research AWS and ASME welding codes and write a summary explaining their purpose and applications.
  • Welding Codes Comparison Report

    • The learner compares selected AWS and ASME welding codes, highlighting similarities, differences, and how they guide safe and proper welding practices in different industries.
    • Compare AWS and ASME welding codes and write a report on their similarities, differences, and practical applications.

Week 4

Suggested activities, Week 4
  • Electrode Identification and Classification

    • The learner examines different types of welding electrodes (e.g., cellulose, rutile, basic) and identifies their characteristics, suitable applications, and job specifications.
    • Identify and classify welding electrodes based on their type, characteristics, and appropriate job applications.
  • Electrode Selection Case Study

    • The learner is given a welding scenario with specific job requirements and selects the most suitable electrode, explaining the reason for the choice based on material, position, and welding process.
    • Choose the appropriate electrode for a given welding job and justify your selection based on job specifications.
  • Plate Welding Position Identification

    • The learner studies diagrams or sample setups of the four main plate welding positions (flat, horizontal, vertical, and overhead) and identifies their characteristics, applications, and challenges.
    • Examine welding setups and identify the plate welding positions along with their characteristics and uses.
  • Plate Welding Position Matching Exercise

    • The learner is given images or descriptions of welds on plates and matches them to the correct welding position, explaining the reasoning based on bead orientation and accessibility.
    • Match sample welds to the correct plate welding positions and explain your choice based on bead orientation and technique.

Week 5

  • Apply plate cutting and edge preparations following the safety precautions.

    Lesson exemplars: Quarter 1/3: Week 1, Week 2, Week 3, Week 4

Suggested activities, Week 5
  • Plate Cutting Practice

    • The learner practices cutting a metal plate to given dimensions using appropriate tools (e.g., oxy-acetylene torch, hacksaw, or cutting machine) while wearing complete PPE and following all safety precautions.
    • Cut a metal plate to the specified size using proper tools and safety measures.
  • Edge Preparation Exercise

    • The learner performs edge preparations (e.g., grinding, beveling, or chamfering) on a cut metal plate to prepare it for welding, ensuring correct angles and smooth finishes while following safety rules.
    • Prepare the edges of a metal plate for welding while using proper techniques and following safety precautions.

Week 6

Suggested activities, Week 6
  • Welding Defects Identification Exercise

    • The learner examines sample welded plates or images showing common defects (e.g., porosity, cracks, undercut, incomplete fusion) and identifies the type of defect, its cause, and possible preventive measures.
    • Identify different welding defects on sample plates and explain their causes and prevention.
  • Welding Inspection Methods Research

    • The learner researches visual, destructive, and non-destructive inspection methods (e.g., visual inspection, bend test, ultrasonic test) and explains how each method detects specific welding defects.
    • Research welding inspection methods and describe how each detects different types of defects.
  • Welding Techniques Research and Report

    • The learner researches different welding techniques (e.g., SMAW, MIG, TIG) and prepares a short report or presentation explaining the process, equipment used, advantages, and safety precautions.
    • Research a welding technique and create a report explaining its process, tools, and safety precautions.
  • Welding Technique Demonstration Analysis

    • The learner watches a video or live demonstration of a welding technique, takes notes on the steps, tools, and safety practices, and then writes an explanation of the technique in their own words.
    • Watch a welding demonstration and write a detailed explanation of the technique, steps, and safety measures observed.

Week 7

Suggested activities, Week 7
  • Arc Striking Practice with Safety Gear

    • The learner practices striking an electric arc on a metal workpiece using proper electrode and holder techniques while wearing complete personal protective equipment (PPE) and observing all safety precautions.
    • Practice striking an arc on a metal workpiece while properly using PPE and following safety procedures.
  • Arc Striking Technique Demonstration and Self-Assessment

    • The learner performs a series of arc striking methods (scratch start, tapping, or lift start) on a practice plate, records the process, and evaluates their own technique for accuracy, control, and safety compliance.
    • Perform different arc striking methods on a practice plate and assess your technique for safety and accuracy.

Week 8

Suggested activities, Week 8
  • Flat Position Weld Bead Practice

    • The learner practices laying a continuous weld bead on a metal plate in the flat position, focusing on consistent bead size, speed, and proper electrode handling while observing all safety precautions.
    • Practice applying a weld bead on a flat metal surface while following proper safety procedures and techniques.
  • Horizontal Position Weld Bead Exercise

    • The learner applies a weld bead on a metal plate in the horizontal position, maintaining control and proper technique, while wearing complete PPE and following safety rules.
    • Apply a weld bead in the horizontal position while ensuring correct technique and adherence to safety precautions.

Week 9

Suggested activities, Week 9
  • Basic Weld Repair Practice

    • The learner identifies defects on a practice metal piece and performs basic weld repairs to fix cracks or gaps, while following proper welding techniques and safety precautions.
    • Repair defects on a metal piece using proper welding techniques while following safety procedures.
  • Weld Repair Assessment and Correction

    • The learner inspects a pre-welded metal piece with intentional defects, plans the repair approach, and applies welding to correct the issues while wearing PPE and observing all safety measures.
    • Inspect a defective weld, plan the repair, and fix it safely using proper welding techniques.

Week 10

Suggested activities, Week 10
  • Service Cost Computation Worksheet

    • The learner is given a scenario of a specific job (e.g., tile installation, pipeline service, or welding task) with measurements, material costs, and labor rates, and computes the total service cost accurately.
    • Compute the total service cost of a given job using the provided materials, labor rates, and measurements.
  • Job Cost Estimation Case Study

    • The learner analyzes a case study describing a real-life job requirement, determines the quantity of materials, labor, and overhead, and calculates the complete service cost.
    • Analyze a job scenario and calculate its total service cost based on materials, labor, and overhead.
Suggested performance tasks
  • Individual Plate Cutting and Edge Preparation Task

    • The learner independently performs plate cutting and edge preparation on a metal plate by correctly measuring, cutting, and finishing the edges using appropriate tools and proper work techniques.
    • Cut a metal plate to the given dimensions and prepare its edges using proper tools and correct procedures.
  • Group Plate Cutting and Edge Preparation Project

    • In groups, learners work together to perform plate cutting and edge preparation for a given metalwork task, demonstrating teamwork, accuracy, and proper use of tools.
    • Work as a group to cut metal plates and prepare their edges according to the given specifications.
  • Individual SMAW Basic Welding Task

    • The learner independently performs a basic Shielded Metal Arc Welding activity by setting up the equipment and producing a simple weld bead or joint while applying proper welding techniques and safety practices.
    • Perform a basic SMAW weld by properly setting up the equipment and applying correct welding techniques.
  • Group SMAW Welding Project

    • In groups, learners collaborate to complete a simple welding project using SMAW, demonstrating proper welding processes, teamwork, and correct application of welding techniques.
    • Work as a group to complete a simple welding project using correct SMAW processes and techniques.
  • Individual Service Cost Computation Task

    • The learner independently computes the total service cost for a given job by identifying job requirements, estimating materials and labor, and calculating the overall cost.
    • Compute the total service cost of a given job based on the listed job requirements and cost details.
  • Group Job Cost Estimation Project

    • In groups, learners analyze a job scenario and collaboratively prepare a complete and accurate service cost estimate based on the identified job requirements.
    • Work as a group to prepare and present a service cost estimate based on the given job requirements.

Lesson exemplars

DepEd's lesson exemplars for the subject that match a competency on this page, in DepEd's order. Each competency names the ones it matches.

For school heads

School heads lead qualitative reviews of lesson plans "to ensure alignment with curriculum standards and learner needs", and the findings are the basis for coaching (DO 016, s. 2026, para. 37(b)). With a plan beside this page, a head can check these points.

  • The competency the plan names appears on this page, in this sector's list. A plan identifies "the learning competencies to be targeted during the learning session" (DO 016, s. 2026, para. 7(a)(i)).
  • DepEd's note says each sector "is studied for one term", and this file names no term. Ask when the school schedules this sector, and count the weeks on this page from its start.
  • Compare the plan's week with the weeks this page gives its competency. A plan ahead or behind is a question to ask about pacing, not a fault: DO 009, s. 2026 intends the budget of work as "a guiding reference only for teachers in lesson planning" (para. 25).
  • Before the sector ends, compare the competencies the plans have taught with the list here; one not yet taught is something to plan with the teacher. Reports to parents reflect "the competencies covered" (DO 009, s. 2026, para. 28).
  • Where the plan quotes content or performance standards, check them against the ones printed under "Weeks" here. Annex B of DO 016, s. 2026 asks for the content or performance standards "applicable to the sessions", but the order's framework names the competencies, not the standards, so leaving them out is no fault (paras. 7 and 10).

Guides

More TLE budgets of work for Grades 9 and 10

About this page

A teacher's lesson plan names its competencies from the curriculum, and this budget of work is a guide to the weeks each one takes. The budget of work's text on this page is DepEd's, as DepEd prints it in its PDF, which DepEd last updated on Apr 7, 2026; this copy was made from that PDF on Nov 16, 2026 by a program and checked against it. The lesson exemplars are DepEd's. What this page says of each, its quarter, week, school year, pages and notice, and its title where one is shown, comes from DepEd's list of lesson exemplars and from the exemplar itself. The lines under the title, At a glance, the notes on the lesson exemplars, For school heads, the links under "More TLE budgets of work for Grades 9 and 10", this section, and labels such as "Week" and "Content standard" are NASH Reviewer's.

NASH Reviewer is not affiliated with DepEd, and these pages are free. For the official text, open DepEd's PDF.

If a line here differs from DepEd's PDF, write to support@nash.com.ph.

From the budget of work to the NASH

Practice applying the standards

Checking lesson plans against the curriculum is instructional leadership, part of Focusing on Teaching and Learning, one of the five PPSSH domains the NASH tests. Practice it with timed situational items.

What you practice with

  • Timed situational items, two minutes each
  • Items aligned with the five PPSSH domains and the SOLO taxonomy
  • Partial credit and an explanation for every choice
  • Premium: every practice set and a NASH-style mock exam
Free
Practice sets to start
30-day pass
₱1,000 for 30 days
Lifetime
₱3,000 once

Practice scores are study aids, not official NASH ratings.