Grade 12 Commercial Air Conditioning and Servicing Budget of Work
Grade 12 Commercial Air Conditioning and Servicing budget of work for SY 2026-2027 (TechPro Electives): DepEd's 6 learning competencies by week, in no set term.
DepEd places each competency in its weeks and names no term.
DepEd lists it under TechPro Electives / Industrial Technologies.
DepEd's Grade 12 budgets of work are for its strengthened senior high school curriculum, which in SY 2026-2027 only the schools that piloted it in Grade 11 in SY 2025-2026 teach in Grade 12. Grade 12 in every other school follows the 2016 K to 12 senior high school curriculum in SY 2026-2027, and every school moves Grade 12 to the strengthened curriculum in SY 2027-2028 (DO 017, s. 2026, para. 7; DM 036, s. 2026, para. 4).
On this page
At a glance
Counted by NASH Reviewer from DepEd's file.
| Part | Weeks | Competencies |
|---|---|---|
| Weeks | 1 to 11 | 6 |
DepEd's notes
Please note that each Tech-Pro elective is completed within one term if delivered at Grade 12.
Weeks
- Elective
- Commercial Air-Conditioning Installation and Servicing
- Prerequisite
- Domestic Refrigeration and Air-Conditioning Servicing
- Content standard
Understands the concepts and principles of the Commercial Air-Conditioning unit
- Performance standard
The learner performs the installation of the Commercial Air-Conditioning unit with safety precautions.
Weeks 1 - 2
Perform pre-installation procedure for the commercial air-conditioning units
Suggested activities, Weeks 1 - 2
Site Readiness Inspection
- Learners examine a designated installation site to determine if it meets the requirements for installing a commercial air-conditioning unit, including space, electrical provision, ventilation, and safety conditions.
- Inspect the assigned installation site using a checklist and identify the necessary preparations before installing a commercial air-conditioning unit.
Tools and Materials Preparation Drill
- Learners identify, organize, and check the tools, equipment, and materials needed for installing commercial air-conditioning units while applying safety procedures.
- List, gather, and inspect the required tools and materials for air-conditioning installation and demonstrate proper handling.
Weeks 3 - 4
Perform installation of commercial air-conditioning units
Suggested activities, Weeks 3 - 4
Unit Mounting Simulation
- Learners practice the proper mounting and positioning of commercial air-conditioning units or simulated equipment, ensuring correct alignment, stability, and safety.
- Install the assigned air-conditioning unit on a mounting frame or designated area following the correct installation procedures and safety precautions.
System Installation Practice
- Learners perform the step-by-step installation process including positioning the unit, connecting basic piping or electrical components, and checking the setup.
- Follow the installation guide to connect the main components of the commercial air-conditioning unit and demonstrate proper installation procedures.
Suggested performance tasks, after Weeks 3 - 4
Individual Performance Task: Safe AC Unit Installation Drill
- The learner individually demonstrates the proper installation of a commercial air-conditioning unit or simulated unit, including positioning, mounting, and basic connection of components while strictly following safety precautions and proper tool handling.
- Install the assigned commercial air-conditioning unit or mock-up setup following the correct installation procedures while wearing appropriate PPE and observing safety practices.
Group Performance Task: “Commercial AC Installation Project”
- Learners work collaboratively to plan and perform the complete installation process of a commercial air-conditioning unit, including site preparation, mounting, basic piping or electrical connections, and safety inspection.
- In groups, install a commercial air-conditioning unit following the installation guide and demonstrate proper coordination and safety precautions throughout the process.
Weeks 5 - 6
- Performance standard
The learner performs maintenance, troubleshooting, and commissioning Commercial Air- Conditioning units with safety precautions.
- Content standard
Understands the concepts and principles of the Commercial Air-Conditioning unit
Perform service and maintenance of the commercial air- conditioning units
Suggested activities, Weeks 5 - 6
Routine Maintenance Practice
- Learners perform basic service procedures such as cleaning filters, checking electrical connections, inspecting coils, and ensuring the unit operates efficiently and safely.
- Perform routine maintenance on an assigned air-conditioning unit by cleaning components and inspecting parts using proper tools and safety precautions.
Maintenance Checklist Application
- Learners use a standard maintenance checklist to systematically evaluate the condition of a commercial air-conditioning unit and identify maintenance needs.
- Inspect the assigned air-conditioning unit using a maintenance checklist and record the service actions required.
Week 7
Discuss pre-troubleshooting of commercial air- conditioning
Suggested activities, Week 7
AC Problem Analysis Discussion
- Learners analyze common air-conditioning problems (e.g., insufficient cooling, unusual noise, or water leakage) and discuss possible causes before performing actual troubleshooting.
- Analyze given air-conditioning problem scenarios and discuss possible causes and initial checks before troubleshooting.
Pre-Troubleshooting Flowchart Activity
- Learners create a simple diagnostic flowchart that outlines the steps to follow before troubleshooting an air-conditioning unit.
- Develop a flowchart showing the pre-troubleshooting steps for identifying possible air-conditioning system issues.
Weeks 8 - 9
Perform troubleshooting of commercial air-conditioning units
Suggested activities, Weeks 8 - 9
AC Fault Detection Simulation
- Learners identify and diagnose faults in a simulated or actual air-conditioning unit using diagnostic tools and observation skills.
- Inspect the assigned air-conditioning unit, identify the fault using troubleshooting procedures, and report the possible cause.
Troubleshooting Procedure Drill
- Learners follow a structured troubleshooting process to locate system problems such as electrical faults, refrigerant issues, or airflow restrictions.
- Perform step-by-step troubleshooting on a simulated AC fault while observing proper safety procedures.
Weeks 10 - 11
Perform commissioning of commercial air conditioning units
Suggested activities, Weeks 10 - 11
System Start-Up Verification
- Learners perform the start-up procedures of a commercial air-conditioning unit and verify that all components operate correctly after installation or servicing.
- Start the air-conditioning unit following commissioning procedures and observe system performance and safety conditions.
Commissioning Performance Check
- Learners measure and record operational parameters such as airflow, temperature, and electrical readings to confirm proper system performance.
- Use appropriate tools to measure system performance and complete a commissioning report for the air-conditioning unit.
Suggested performance tasks, after Weeks 10 - 11
Individual Performance Task: AC Service and Troubleshooting Drill
- The learner individually performs basic maintenance and troubleshooting procedures on a commercial air-conditioning unit, such as cleaning filters, inspecting components, identifying faults, and verifying system operation while observing safety precautions.
- Perform maintenance and troubleshoot the assigned air-conditioning unit using proper tools and PPE, then check and record the unit’s operational condition.
Group Performance Task: “Commercial AC System Commissioning Project
- Learners work collaboratively to conduct maintenance, troubleshooting, and final commissioning of a commercial air-conditioning unit, ensuring that the system operates properly and safely after service.
- In groups, service and troubleshoot the assigned AC unit, perform commissioning procedures, and present a brief report of the system’s performance and safety checks.
For school heads
School heads lead qualitative reviews of lesson plans "to ensure alignment with curriculum standards and learner needs", and the findings are the basis for coaching (DO 016, s. 2026, para. 37(b)). With a plan beside this page, a head can check these points.
- The competency the plan names appears on this page, in this elective's list. A plan identifies "the learning competencies to be targeted during the learning session" (DO 016, s. 2026, para. 7(a)(i)).
- This file names no term. Ask when the school schedules this elective, and count the weeks on this page from its start.
- Compare the plan's week with the weeks this page gives its competency. A plan ahead or behind is a question to ask about pacing, not a fault: DO 009, s. 2026 intends the budget of work as "a guiding reference only for teachers in lesson planning" (para. 25).
- Before the elective ends, compare the competencies the plans have taught with the list here; one not yet taught is something to plan with the teacher. Reports to parents reflect "the competencies covered" (DO 009, s. 2026, para. 28).
- Where the plan quotes content or performance standards, check that they are the last ones printed before its weeks on this page: this file prints a pair over each unit of weeks. Annex B of DO 016, s. 2026 asks for the content or performance standards "applicable to the sessions", but the order's framework names the competencies, not the standards, so leaving them out is no fault (paras. 7 and 10).
Guides
- DO 016, s. 2026: what a lesson plan holds, and how a school head reviews plans and coaches
- Writing an ILAW lesson plan, part by part, with three sample plans
- From curriculum to lesson: unpacking a competency, and the budget of work as a guide to pacing
- DO 015, s. 2026: summative tests, the term examination and what a school head checks
- The three-term school calendar: term dates, test dates and the End-of-Term Block
More Grade 12 budgets of work in Industrial Technologies
About this page
A teacher's lesson plan names its competencies from the curriculum, and this budget of work is a guide to the weeks each one takes. The budget of work's text on this page is DepEd's, as DepEd prints it in its PDF, which DepEd last updated on Jun 19, 2026; this copy was made from that PDF on Nov 16, 2026 by a program and checked against it. The lines under the title, At a glance, For school heads, the links under "More Grade 12 budgets of work in Industrial Technologies", this section, and labels such as "Week" and "Content standard" are NASH Reviewer's.
NASH Reviewer is not affiliated with DepEd, and these pages are free. For the official text, open DepEd's PDF.
If a line here differs from DepEd's PDF, write to support@nash.com.ph.